Listaár: 56 370 Ft
Cikkszám: MTN5510-1419
Rendelésre
Gyártó: SCHNEIDER Adatlap: Gyártó weboldala Megnevezés: MERTEN ARGUS 1-10V jelenlétérzékelő, álmennyezeti, 360° Csoport: Háztartási kapcsoló készülékek Osztály: Mozgás-/jelenlétérzékelő komplett (EC000133 - ETIM-7.0)
Amennyiben kérdése van, kérjük keresse kollégánkat!
Megosztás:
Kivitel jelenlétérzékelő
Érzékelő fajtája passzív infravörös (PIR)
DALI-illesztőhellyel hamis
Állandó fényvezérlés igaz
HLK (fűtés-szellőzés-klíma)-vezérlés hamis
Kisállat-zóna hamis
Átbújásvédelem/háttérfigyelés igaz
Hálózatba köthető igaz
Letapogatási szög 360 °
Optimális szerelési magasság 2.5 m
Lépcsőház ellenőrzés igaz
Áthidalókapcsoló hamis
Max. hatótávolság oldalra 7 m
Max. hatótávolság előre 7 m
Érzékelőmező átmérő padlón 14 m
Alkalmas vezeték nélküli átvitelhez hamis
Távműködtetés igaz
Távvezérléssel igaz
Megszólalási megvilágítás beállítható igaz
Jelzőegységgel hamis
Fedőrögzítésre alkalmas igaz
Fali szerelésre alkalmas hamis
Fénycsökkentés fényerőszabályozóval hamis
Szerelési mód süllyesztett
Csatlakozási mód csavaros
Anyaga műanyag
Anyagminőség termoplaszt
Halogénmentes igaz
Felület kezeletlen
Felület kivitele fényes
Antibakteriális hamis
Szín fehér
RAL-szám (hasonló) 9010
Átlátszó hamis
Védettségi fokozat (IP) IP20
Feszültség fajtája AC
Frekvencia 50 ... 60 Hz
Névleges feszültség 230 V
Min. bekapcsolási ciklusidő 10 s
Max. bekapcsolási ciklusidő 30 min
Bekapcsolási késleltetés 0 s
Érzékelési szög vízszintesen 0 ... 360 °
Megszólalási megvilágítás 10 ... 1000 lx
Max. kapcsolási teljesítmény 2200 W
C-terhelés igaz
Hőmérséklet 0 ... 25 °C
Kapcsolási zónák száma 136
Max. indítóáram 10 A
Vezérlőáram 50 mA
Riasztási funkció hamis

Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) within an adjustable area of detection and starts a staircase timer. For fluorescent lamps with electronic ballast or electronic transformer with 1-10 V interface. The sensor module is equipped with a light sensor with an adjustable brightness threshold so that the lighting is only switched on when a specified brightness threshold is not met. When there is sufficient natural light, the presence function allows the sensor module to switch off the lighting even when a person is present. The switchable light control ensures that the room illumination remains almost constant. The sensor module continuously measures the brightness in the room and adjusts the illumination to an adjustable setpoint. For mounting in a size 60 flush-mounted socket or in the surface-mounted housing available as an accessory. With claw and screw fixing. With screw terminals. Functions: Switching and dimming of one output. External triggering via one PL-input (Slave, Side controller Plus). Memory function. Brightness dependent staircase lighting function, light control. Nominal voltage: AC 220/230 V, 50/60 Hz. Nominal current: max. 10 A, cos Phi 0.6. Control current: max. 50 mA. Load type: max. 25 controllable EBs (1-10 V). Outputs: 1 x make contact, 1x (1-10 V). Max. switching capacity: Incandescent lamps: 2200 W. HV halogen lamps: 2000 W. LV halogen lamps with wound transformer: 500 VA. Electronic transformers: 1050 W. Capacitive load: 10 A, 140 µF. Neutral conductor: required (3 conductor system). Wire range: max. 2x2.5 mm². Angle of detection: 360°. Number of levels: 6. Number of zones: 136. Number of movement sensors: 4. Recommended installation height: 2.5 m. Range: a radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable. Brightness threshold: continuously adjustable between approx. 10 and 1000 lux. Overshoot time: Channel 1: continuously adjustable between approx. 10 s and approx. 30 min. Colour: polar white.

Egyéb url Körkörösségi profil - MTN5510-1419
Egyéb url
Használati utasítás url
Termékkép url
Link url RoHS Eur declaration url - MTN5510-1419
REACH nyilatkozat url